Login | Register
Kazakh National Agrarian Research University ISSN 2304-3334 (Print)  ·  ISSN 2304-3334 (Online)
submit an article
Menu
submit an article
AGRICULTURE MECHANIZATION AND ELECTRIFICATION

A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT

Darkhan Ordatayev 1 , Yermek Auyelbek 1 , Yerbol Sarkynov 1 , Kurmanbek Zhanymkhan 1 , Aleh Meshyk 2

1 Kazakh National Agrarian Research University, Almaty, Kazakhstan; 2 Brest State Technical University, Brest, Belarus

doi.org/10.37884/2-2026/19 pp. 225-234 Admitted 09.04.2026 Published 30.04.2026

Abstract

The article discusses the development and construction of a bench mine well designed for factory testing of a mobile mine well cleaning and disinfection unit. The relevance of the study is due to the need to increase the efficiency of operation of decentralized water supply sources subject to siltation and microbiological contamination. The purpose of the work is to create a test bench that allows reproducing the real operating conditions of mine wells and providing a comprehensive check of the functional and resource characteristics of the installation. The design of the bench well provides modeling of the main operational parameters, including geometry, depth, presence of bottom sediments and water inflow. Place of work: Almaty region, Enbekshikazakh district, Saimasay village. The project provides for the creation of an adjustable bench mine well with a depth of up to 30 m and a diameter of 1.0–1.2 m.the structure is implemented in the form of prefabricated reinforced concrete rings or a monolithic structure with an internal casing. Engineering design, modeling of hydrogeological conditions and experimental tests were used as research methods. These approaches ensure that the object of the study is considered in conditions as close as possible to actual operation, and contribute to increasing the reliability of the results obtained. This, in turn, allows you to evaluate the efficiency of the installation in various modes. The paper describes the design features of the stand, the test procedure and the criteria for evaluating the effectiveness of the main components of the installation. Conducting tests on the developed stand makes it possible to identify the design flaws of the equipment, optimize its operating modes and increase the reliability of the system as a whole. 

shaft well test stand cleaning and disinfection mobile unit bottom sediments water supply pneumohydraulic erosion experimental setup

01 Introduction

The full text of the article is available for download in PDF format on the right panel.

02 References

  1. Abdreshov, Sh & Aldiyarova, A. & Kaypbaev, E.. (2020). RESEARCH RESULTS OF THE IMPROVED HYDRAULIC JET PUMPING UNIT. NEWS of National Academy of Sciences of the Republic of Kazakhstan. 6. 14-22. DOI: 10.32014/2020.2518-170X.125 . [in English]
  2. Әуелбек, Е., Саркынов , Е., Радзевичус , А., Қапар , Ш., & Oңласын Ұ. (2023). МЕТОДИКА РАСЧЕТА И ОПРЕДЕЛЕНИЕ ПАРАМЕТРОВ ВСАСЫВАЮЩИХ УСТРОЙСТВ ПЕРЕДВИЖНОЙ УСТАНОВКИ ДЛЯ ОЧИСТКИ ШАХТНЫХ КОЛОДЦЕВ. Izdenister Natigeler, (1 (97), 173–180. https://doi.org/10.37884/1-2023/20 [in Russian]
  3. Әуелбек Е.К., Ордатаев Д.Б., Саркынов Е., Жакупова Ж.З. Шахталы құдықтарын тазартуға және дезинфекциялауға арналған жылжымалы қондырғы: конструкторлық құжаттаманы әзірлеу // Ізденістер, нәтижелер – Исследования, результаты. Vol. 28. Іs. 1. Number 109. 2026. Рр. 0–00 (In Kaz.). https://doi.org/ 10.58420.ptk.2026.109.01.000
  4. El-Bayoumi M., Abouel-Fotouh A. M., Berry A. E. (2023). LAB-SCALE SYSTEM FOR SMALL RAM PUMP’S TESTING AND PERFORMANCE EVALUATION. Frontiers in Heat and Mass Transfer, 20(1), 1–6. https://doi.org/10.5098/hmt.20.8[in English]
  5. Evangelista, Stefania, Giuseppe Tortora, and Giacomo Viccione. 2023. "Experimental and Numerical CFD Modelling of the Hydrodynamic Effects Induced by a Ram Pump Waste Valve" Sustainability 15, no. 17: 13104. https://doi.org/10.3390/su151713104[in English]
  6. Kassymbekov Zhuzbay Kozhabaevich, Atamanova Olga Viktorovna, Alimova Kulyash Kapbasovna, & Kassymbekov Galymzhan Zhuzbaevich. (2020). PROTECTION OF CENTRIFUGAL PUMPS FROM ABRASIVE WEAR USING A VACUUM HYDROCYCLONE. Scientific Journal of Pedagogy and Economics, (1), 6–13. https://journals.nauka-nanrk.kz/bulletin-science/article/view/676. [in English]
  7. Piñon-Flores, L.F., Gutiérrez-Ruiz, M.E., González-Chávez, J.L. et al. Removal of Metal(Loids) from Acid Mine Drainage Using Manganese Oxide Wastes from a Mining-Metallurgical Process. Mine Water Environ 43, 449–462 (2024). https://doi.org/10.1007/s10230-024-01003-2 [in English]
  8. Sarkynov, Y., Yakovlev, A., Trofimov, G., Zhakupova , Z., Ryskulbekova , L., Zhanymkhan , K., & Yussupov , Z. (2024). CALCULATION TO DETERMINE THE TECHNICAL AND ECONOMIC EFFICIENCY OF PUMPING UNITS FOR LIFTING WATER FROM WATERCOURSES POWERED BY WATER ENERGY FOR WATERING PASTURES AND IRRIGATION OF LAND. Izdenister Natigeler, (3(103). Retrieved from https://journal.kaznaru.edu.kz/index.php/research/article/view/645 [in English]
  9. Тлеш, Д., Халхабай , Б., Хойшиев , А., & Байарыстанов , М. (2025). ШАХТА СУЛАРЫН ТИІМДІ ТАЗАРТУДЫҢ ТЕХНОЛОГИЯЛЫҚ НЕГІЗДЕРІ. Izdenister Natigeler, (2 (106), 401–409. https://doi.org/10.37884/2-2025/40 [in Kazakh]
  10. V.A. Tumlert, Zh.K. Kasymbekov, R.A. Dzhaisambekova, E.V. Tumlert, B.Sh. Amanbayeva; INFLUENCE OF THE HYDROGEOLOGICAL MODE OF OPERATION ON THE CHARACTER OF COLLATING OF THE FILTER AND THE FILTER ZONE OF SEASONAL WELLS. NEWS of the National Academy of Sciences of the Republic of Kazakhstan SERIES OF GEOLOGY AND TECHNICAL SCIENCES ISSN 2224-5278 Volume 3, Number 459 (2023), 295–304 https://doi.org/10.32014/2023.2518-170X.314 [in English]
  11. Zhurinov M., Kassymbekov Zh., Kassymbekov G. Zh. 2019. Mastering and development hydropower in Kazakhstan. The National Academy of Sciences of the Republic of Кazakhstan, Series of Geology and Technical Sciences, 3(435), 219–224 https://doi.org/10.32014/2019.2518-170X.88 [in English]

Citation Links

[1]2026. A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT. Izdenister natigeler. 28, 2 (110) (Apr. 2026), 225–234. DOI:https://doi.org/10.37884/2-2026/19.
(1)A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT. Izdenister natigeler 2026, 28 (2 (110), 225-234. https://doi.org/10.37884/2-2026/19.
A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT. (2026). Izdenister Natigeler, 28(2 (110), 225-234. https://doi.org/10.37884/2-2026/19
A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT. Izdenister natigeler, [S. l.], v. 28, n. 2 (110), p. 225–234, 2026. DOI: 10.37884/2-2026/19. Disponível em: https://kazvetjournal.kaznaru.edu.kz/index.php/research/article/view/1328. Acesso em: 15 sep. 2026.
“A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT”. 2026. Izdenister Natigeler 28 (2 (110): 225-34. https://doi.org/10.37884/2-2026/19.
“A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT” (2026) Izdenister natigeler, 28(2 (110), pp. 225–234. doi:10.37884/2-2026/19.
[1]“A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT”, Izdenister natigeler, vol. 28, no. 2 (110), pp. 225–234, Apr. 2026, doi: 10.37884/2-2026/19.
“A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT”. Izdenister Natigeler, vol. 28, no. 2 (110), Apr. 2026, pp. 225-34, https://doi.org/10.37884/2-2026/19.
“A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT”. Izdenister natigeler 28, no. 2 (110) (April 30, 2026): 225–234. Accessed September 15, 2026. https://kazvetjournal.kaznaru.edu.kz/index.php/research/article/view/1328.
1.A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT. Izdenister natigeler [Internet]. 2026 Apr. 30 [cited 2026 Sep. 15];28(2 (110):225-34. Available from: https://kazvetjournal.kaznaru.edu.kz/index.php/research/article/view/1328
1.A BENCH-MOUNTED SHAFT WELL FOR TESTING A MOBILE CLEANING AND DISINFECTION UNIT. Izdenister natigeler. 2026;28(2 (110):225-234. doi:10.37884/2-2026/19