Abstract
The article presents the outcomes of both theoretical and experimental studies focused on justifying the parameters of a compact feed distributor-mixer.. Theoretical research led to the development of analytical expressions for determining the performance of the feed mixture unloading and calculating the mass of feed unloaded per meter of the feeding table. These expressions serve as the basis for optimizing the device’s operation.
Experimentally, the rational values of the horizontal auger’s rotational speed, mixing time, unloading window area, and uniformity of feed mixture unloading along the length of the feeding table were determined.
The optimal rotational speed of the horizontal auger was found to be 26 rpm, which ensured stable and efficient operation of the device. The mixing time for sheep was determined to be between 3-5 minutes, while for cattle (Cattle) it was 8-9 minutes, which contributed to better feed mixture quality. The uniformity of feed unloading along the length of the feeding table was 92.4%, an important indicator of uniform animal feeding. The obtained results allow recommending these parameters for improving the efficiency of feed distributor-mixers in agricultural production, and also provide a foundation for further research in the field of feed production mechanization.
01 Introduction
The full text of the article is available for download in PDF format on the right panel.
02 References
- 1 Ильин И.В. Тенденции развития техники для животноводства и кормопроизводства //Тракторы и сельскохозяйственные машины. – 1996. – №8. – С.1-9.
- 2 Для крупных хозяйств: Самоходные кормосмесители //Новое сельское хозяйство. – 2005. – №1. – С.82-89.
- 3 Кормоцех на колесах КИС-8, КИС-9, КИС-10: проспект /Новосибирский опытно-экспериментальный завод нестандартизированного оборудования. – 1 с.
- 4 Фролов В.Ю., Сысоев Д.П. Оптимизация процессов приготовления кормов раздатчиком-смесителем //Техника и оборудование для села. – 2011. – №2. – С.22-23.
- 5 Сысоев Д.П., В.Ю. Фролов /Совершенствование рабочего органа раздатчика кормов //Техника в сельском хозяйстве. – 2009. – №5. – С.12-15.
- 6 Сысоев Д.П., В.Ю. Фролов /Экспериментальные аспекты оптимизации процесса приготовления кормов измельчителем-смесителем //Механизация и электрификация сельского хозяйства. – 2009. – №10. – С.16-18.
- 7 Тищенко М.А., Брагинец С.В., Клименко В.И. Комбинированная машина для приготовления и раздачи кормов // Сельский механизатор. – 2010. – №11. – С.22-23.
- 8 Кулаковский И.В., Кирпичников Ф.С., Резник Е.И. Машины и оборудование для приготовления кормов. Ч. 1.: Справочник. – М.: Россельхозиздат, 1987. – 285 с.
- 9 Касандрова О.Н., Лебедев В.В. Обработка результатов наблюдений. – М.: Наука, Главная редакция физ-мат литературы, 1970. – 104 с.
- 10 В.Г. Савенко, Л.В. Ларичкина, Б.В. Лукьянов, П.Б. Лукьянов. Приготовление и раздача полнорационных кормосмесей для КРС. Технология и машины. Рекомендации по применению. – Минск, 2005. – 60 с.